The Deluxe glow is the same as the standard glow switch, but with all the leads, croc clip, and tag washer fitted. This makes it ready to use apart from fitting the NiCad of your choice to the Glow switch. This version of the Glow Switch also has a charge socket fitted which you mount on the fuselage for ease of charging.

The All in One Glow Switch has been designed as a complete ready to use glow switch. The unit is fitted with a built in 1800ma NiCad and uses a croc clip to go onto the tip of the glow plug and a tag washer to go under one of the engine bolt. The charging of the internal cell is done by using a standard radio charger.

The standard Relay Switch has been designed to allow RC modellers to switch ancillary electrical devices like lights a camera or flares etc. The contacts can handle up to 20 Amps and voltages up to 20 Volts.

The Glow Switch lead set has been designed to go with the standard glow switch. This loom makes it easy for people who find it difficult to work out wiring or don’t have to time make the loom.

The lead set comes complete with a D.C charging socket. The loom has a croc clip for the plug and a tag washer to connect to the engine the same as the All in One Glow Switch unit.

The Safe Switch is a total replacement for standard electro mechanical type switches. It is an electronic based switch with an internal regulator, which allows more cells to be used without running your servo at too high a voltage.

The Safe Switch uses electronics to switch the RX supply on and off. This has the advantage that if the wires to the on/off switch should get broken for what ever reason the supply will stay on. Also the use of a jack plug and socket system means that the model cannot be accidentally switched off when launching the model.

Specification:
Input voltage 5 to 7 cells.
Output 5 to 5.1volts max
Max current 5amps continuous.