Standard Glow Plug Switch
£19.95 inc. VAT
FREE DELIVERY
PRODUCT DESCRIPTION
The Standard Glow switch has been designed to switch 1 or 2 glow plugs. The new version uses a one button set system, so setting the switch point and direction is very easy.
The customer fits their own NiCad cells according to number of plugs used 1 cell for one plug and 3 cells for a 2 plug set-up.
INSTRUCTIONS FOR USE
The glow plug will be activated when the control stick is below the "set point" and deactivated when the stick is above it.
SET-UP
Connect the throttle servo to the receiver using a "Y" harness and plug the Slow Driver Unit lead into the spare arm of the "Y". Move the throttle stick to the position where you would like the glow plug to activate. (About one eighth throttle is a good starting point.) Press and hold the button until the LED lights up, then release the "Set Point" button to store the set point.
SAFETY
Please ensure that the set point button cannot be pressed accidentally while the unit is in use.
WIRING
Connect the glow battery to the Slow Driver Unit following the diagram below. Be sure to observe the correct polarity of the glow battery.
